Docking & Mooring Solution Provider
Home > Products > Foam Filled Fender > Yacht Foam Fender >

Floating Boat Fender Eva Foam Filled Fender

Floating Boat Fender Eva Foam Filled Fender

Floating Boat Fender Eva Foam Filled Fender
Floating Boat Fender Eva Foam Filled FenderFloating Boat Fender Eva Foam Filled FenderFloating Boat Fender Eva Foam Filled FenderFloating Boat Fender Eva Foam Filled Fender
CategoriesYacht Foam Fender
BrandJerryborg Marine,safe docking,safe mooring
ModelJRBFF
Materialclosed cell EVA foam
Colorwhite/grey/blue/yellow/red......
Coatingpolyurethane/polyurea
CertificateCCS.ABS.LRS.BV
UsageSTS, STD
Brand nameJerryborg
PortQingdao port
FOB portQingdao, Shanghai
Terms of PaymentL/C, D/A, D/P, Western Union, MoneyGram, T/T, Paypal
Update Time2021-05-17
Detail Information
Floating Boat Fender Eva Foam Filled Fender 

What is EVA Foam Filled Fender ?

EVA foam filled fender is suitable for a variety applications due to its high energy absorption. It's composed of an outer polyurea protective layer, a synthetic rubber nylon cord fabric, and 100% closed cell foam core to absorb impact force. EVA foam filled fender outer layer is proven to be strong enough cause it has extremely low frictional resistance and wear-resistance.

EVA foam filled fender is suitable for tugboats, work boats, pilot ships, suitable for offshore ports, gravity ports, especially for large tidal wave wharfs. EVA foam filled fenders are also a viable option for ship-to-ship (STS) operations.

Advantage of EVA Foam Filled Fender

1. High energy absorption, low counter force

2. Diameter from 500mm to 4500mm,length from 1000mm to 9000mm

3. Anti-aging with a long lifespan

4. Smaller skin damages can easily be repaired on site

5. Excellent floating performance and not affected by tides

6. Good angular performance


Structure of EVA Foam Filled Fender

1. 100% closed cell EVA foam


Each cell of EVA foam is separated, so water cannot migrate into the foam, which ensures a high amount of buoyancy, even in case of damage to the outer polyurea (SPUA) coating. Even after many years of active service, the foam core can be returned to the factory, re-skinned and made ready for a new lease of life. A wide range of foam densities are available, from 20Kg/m³ to 200kg/m³, to offer a high dissipation of Energy and a low Reaction Force.

closed cell foam
foam fender

2. Polyurea (SPUA) coating skin


Polyurea is a type of elastomer coating which is sprayed onto the EVA foam core, thereby improving performance of foam fender and giving the fender increased resistance against abrasion during operations. Thickness of Polyurea coating is customized as per customer demand, usually from 3mm to 100mm. Jerryborg’s wear and tear resistant Polyurea coating let our foam fender performs well in even the harshest environments.

polyurea coating
polyurea elastomer sample