Docking & Mooring Solution Provider
Home > Products > Docking & Mooring Accessories > Steel Rope >

7×19 Stainless Steel Wire Rope

7×19 Stainless Steel Wire Rope

7×19 Stainless Steel Wire Rope
CategoriesSteel Rope
AlbumView larger image
BrandJerryborg Marine,safe docking,safe mooring
Update Time2019-11-16
Detail Information
Marine Steel Wire Ropes

Jerryborg Marine supply a wide range of Steel Wire Ropes from well selected manufacturers for various marine and offshore applications.
Wire Structure:
7×19 indicates a collection of 133 individual wires grouped as 7 sub-strands of 19 wires each. Consequently, 7 wire bundles of 19 wires twisted together form a single strand. This is our most flexible wire for use in rigging or small cranes or winches rather than balustrade construction. Low Cost Wire does not recommend 7×19 wire for balustrade construction.
Applications:
7x19 AISI316 stainless steel wire rope is used for a wide range of applications. Extremely flexible when compared to both 1x19 and 7x7, the 7x19 construction is often used where a flexible stainless steel wire rope is particularly required. 7x19 performs well for running applications. Used extensively throughout the marine industry as well as for general engineering applications, 7x19’s excellent flexibility make it a favourite for control cable and a variety of marine rigging applications, examples of which are shown below:
•  Control cables
•  Guardrail
•  Standing rigging
•  Running rigging
•  Steering cable
•  Marine/Saltwater environment
•  Sewage treatment works
•  Wire rope slings
•  Davit ropes
For further information feel free to contact us . 
    
>> Breaking Load Table
Nominal Diameter Approximate Mass Minimum breaking loads - 1570 Mpa
[mm] [kg/m] [kN] [kg]
3 0.033 5 509
4 0.059 8.89 906
5 0.093 13.9 1,417
6 0.134 20 2,039
7 0.182 27.3 2,783
8 0.238 35.6 3,630
10 0.372 55.6 5,669
12 0.535 80 8,157
14 0.728 109 11,114